volkswagen Workshop Repair Guides

Volkswagen Passat GLX V6 Workshop & Auto Repair Manuals

Air Bag MIL ON, DTC 00588 (Resistance Too Low) Set|Page 9525 > < Air Bag - MIL ON DTC 00588 (Resistance Too High) Set|Page 9520
Page 1
background image

Air Bag Harness: Customer Interest
Air Bag MIL ON, DTC 00588 (Resistance Too Low) Set

Group: 01 

Number: 00-07

Date: Oct. 26, 2000

Subject: 
Supplemental Diagnostic Procedures - Airbag, (DTC) 00588 Stored in DTC Memory

Model(s): 
All except Cabrio, EuroVan

2000 -->

Condition
Airbag warning light ON with Diagnostic trouble code (DTC) 00588 "Resistance too small (low)" for Driver's side front airbag system stored in DTC
memory.

Note:

This Technical Bulletin should be used ONLY if Technical Bulletin, Group 01 number 00-02 dated Apr. 24, 2000 (Driver's Side Airbag On-Board
Diagnostic) has been used without identifying the causal failure.

Rationale
If the airbag control module senses a problem and stores DTC 00588, it will also display either "Resistance too small" or "Resistance too large". This
diagnostic procedure applies ONLY when DTC display indicates

"Resistance too small" and should not be used for diagnosing other DTC displays.

This indicates one of the following conditions:

^

A short between the two wires to the Driver's side airbag.

^

An internal short in the Driver's side airbag

^

A short between the two airbag wires in the Spiral spring assembly

^

A poor connection at the bottom (wiring harness side) connector of the Spiral spring.

Service

Prior to performing the following procedure:

WARNING!

When working on ANY airbag system. ALWAYS read and follow Repair Manual CAUTIONS and WARNINGS!

-

Remove the Driver's side airbag (see Driver's side airbag unit, removing and installing in VESIS Repair Group 69.

Air Bag MIL ON, DTC 00588 (Resistance Too Low) Set|Page 9525 > < Air Bag - MIL ON DTC 00588 (Resistance Too High) Set|Page 9520