Passat GLX V6 V6-2.8L (ATQ) (2001)
/Page-189003.png)
^
Disconnect ABS wheel speed sensor harness connector -arrow A- and push out grommet-arrow B-.
^
Loosen wheel bolts.
^
Raise vehicle.
^
Remove wheel.
^
Disconnect ABS wheel speed sensor wiring from retainers (arrows).
^
Remove clip from ABS wheel speed sensor.
^
Pry ABS wheel speed sensor out of wheel bearing module using special tool 80-200.
Installing
^
Before inserting ABS wheel speed sensor, clean inner surface of bore hole and coat speed sensor with solid lubricant paste G 000 650.
