volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 1368 > < With Manufacturer's Scan Tool|Page 1366
Page 3
background image

-

Connect VAG 1598/31 test box to control module wiring harness. Engine Control Module (ECM) is not connected.

-

Check for breaks in wire between test box and 2-way connector (see wiring diagram).
Terminal 2 + socket 39
Wire resistance: max. 1.5 Ohms

-

Check wires for shorts among one another.

-

Also check wires for shorts to battery B+ or Ground (GND).

With Manufacturer's Scan Tool|Page 1368 > < With Manufacturer's Scan Tool|Page 1366