volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Electrical - Battery Charging and Testing Information|Page 8174 > < Electrical - Battery Charging and Testing Information|Page 8172
Page 6
background image

Tip:
Label shown is for example only. DIN or SAE specifications may vary from battery to battery.

Tip:
Two 6-volt batteries are connected in series to achieve 12-volts, the same current value will flow through each battery. As a result, only use a DIN value
of 380A, DO NOT double or halve this value when entering data into
Midtronics tester.

If DIN rating is not shown:

^

Use SAE value as printed on battery label.

If using SAE value rating:

^

Midtronics tester menu option must be changed to achieve accurate results.

^

A change from DIN to SAE can be made from the "Other" menu option on Midtronics tester.

When testing or charging battery installed in vehicle:

^

DO NOT Test/Charge from Remote Location (3.2L).

^

(3.2L) DO NOT use remote location (+) -arrow-.

^

(3.2L) DO NOT use engine bracket (-) -arrow-.

Electrical - Battery Charging and Testing Information|Page 8174 > < Electrical - Battery Charging and Testing Information|Page 8172