Passat GLX V6 V6-2.8L (ATQ) (2001)
Fig. 3 Relieving tension and removing ribbed belt
-
To relieve tension on ribbed belt, push hex socket head wrench (10 mm AF) downward.
-
Align hole -A- with hole -B-.
-
Insert pin -3204- to secure.
-
Take ribbed belt off belt pulley.
Fig. 4 Allocating ignition cables to ignition coils
A - Ignition coil for cylinders 5 and 3
B - Ignition coil for cylinders 4 and 2
C - Ignition coil for cylinder 6 and 1
Ignition cables are marked with number 1 thru 6.
-
Allocate ignition cables 6 and 1 to ignition coil -C-.
-
Allocate ignition cables 2, 3, 4 and 5 in the same manner.