volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Coupling Rod For Anti-Roll Bar, Removing and Installing|Page 8763 > < Coupling Rod For Anti-Roll Bar, Removing and Installing|Page 8761
Page 1
background image

Stabilizer Link: Service and Repair
Coupling Rod For Anti-Roll Bar, Modified

Coupling rod for anti-roll bar, modified

The ball joint in the coupling has been changed to a rubber mounting.
The track-control link was also slightly modified.

Coupling rod with ball joint
1. Coupling with ball joint

No longer installed on vehicles beginning with vehicle identity no. 3-B-X P-213 727.

2. Track-control link 

was modified.
Only the modified track-control link is still supplied as a spare part.
This track-control link can also be installed in vehicles produced prior to vehicle identity No. 3-B-X P-213 727.
In this case, the clamp -4- must also be used.

3. Self-locking hex nut
4. Clamp

Is not installed in vehicles beginning with vehicle identity No. 3-B-X P-213 727.

5. Self-locking hex nut; 100 Nm
6. Anti-roll bar

Coupling Rod For Anti-Roll Bar, Removing and Installing|Page 8763 > < Coupling Rod For Anti-Roll Bar, Removing and Installing|Page 8761