Passat GLX V6 V6-2.8L (ATQ) (2001)
/Page-2050006.png)
-
Hole -1-, sub-frame hole -2- and aluminum console hole -3- must align on both sides.
Notes: This attachment only replaces subsequent axle alignment measurements when:
^
The sub-frame is removed completely and installed.
^
Holes -1- and -2- align before repairs are made.
-
Tighten bolts -1- and -2- at rear of subframe on both sides of vehicle.
A - Block of wood
-
Protect holes in body for mounting special tool 3393 against corrosion.
-
Tighten hex bolts -A- and -B-.
