Passat GLX V6 V6-2.8L (ATQ) (2001)
The four retaining tabs -arrows B-, visible from above, must not be removed from the printed circuit. The printed circuit will otherwise be damaged.
If the retaining tabs are damaged -arrows A or B-, replace complete cover.
-
Remove complete selector mechanism cover upward.
-
Press in release tab -arrow A- on connector -1- and pull connector out of cover -2- in direction of arrow -B-.
Installing
Install in reverse order of removal but note following:
-
Push connector-1- in opposite direction of arrow -B- in cover -2- before engaging in selector mechanism.