Passat GLX V6 V6-2.8L (ATQ) (2001)
-
Remove bolt -1-.
-
Using inside Torx bit T45, carefully unscrew bolts -3- and -4- from brake servo.
-
Remove cover below instrument panel. Refer to
-
Detach clutch pedal from master cylinder by prying out securing clip for pin with screwdriver -arrow 1- and pulling out pin -arrow 2-.
Note:
Make sure that clutch pedal switch -1- is not pressed out of securing clip. This will damage the thread of the switch and it would have to be
replaced.