Passat GLX V6 V6-2.8L (ATQ) (2001)
To make sure sufficiently secure seating, a clutch pedal switch -1- may be installed only once.
-
Unbolt (-arrows 2-) master cylinder -4- from within passenger compartment.
-
Remove mounting bracket securing bolt (arrow 3).
-
Pull complete foot pedal cluster slightly into passenger compartment.
-
Remove master cylinder.
Installing
Installation is carried out in the reverse sequence, when doing this note the following:
-
Install master cylinder so that seal -1- and washer lie behind mounting bracket.
-
Tighten bolts -2- to 20 Nm
-
Press connecting line -3- with guide (arrow A-) into notch (-arrow B-) in mounting bracket.
A second mechanic is required for the next work step.
-
Push complete foot pedal cluster forward to bulkhead and insert bolt (-arrow-).
During this step, from plenum chamber, the second mechanic must guide line/hose assembly into master cylinder.