volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Front Wiper Blade Park Position|Page 12516 > < Wiper Arm|Locations
Page 1
background image

Wiper Arm: Adjustments
Front Wiper Blade Park Position

 

Wiper Blade Park Position, Adjusting

NOTE:  Ensure that wiper motor is in park position. If necessary, operate wiper switch briefly.

Driver's side

Specification: wiper blade must be 20 mm (0.78") from lower edge of windshield.

-

If necessary, loosen wiper arm and reposition as necessary.
Tightening torque: 20 Nm (15 ft lb).

Passenger's side

Specification: wiper blade must be 20 mm (0.78") from lower edge of windshield.

-

If necessary, loosen wiper arm and reposition as necessary.
Tightening torque: 20 Nm (15 ft lb).

NOTE:  If wiper blades skip during operation, check and adjust wiper blade contact angle

Front Wiper Blade Park Position|Page 12516 > < Wiper Arm|Locations