Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
/Page-1800001.png)
Trim Panel: Service and Repair
C-Pillar Trim
Lower C-pillar Trim, Removing And Installing
Removing
NOTE: The illustrations cover only one side of vehicle, the other side of vehicle is the mirror image.
-
Disengage backrest for rear seatbench and push forward.
-
Loosen hex nut - 2 - and remove lock bolt - 3 -.
-
Pull upholstery - 1 - in upper area out of clip - 4 -, press lower tab - 6 - to rear from sill panel - 7 - and remove upward with tab - 5 -.
-
Remove bolts - 1 -.
-
Remove trim - 2 - from clip - 3 - and from C-pillar.
Installing
Installation is performed in the reverse order of removal.
NOTE: After installing trim, make sure that door seal is properly seated.
