Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
Special tools required
Removing
-
Push piston out of brake caliper housing with compressed air via brake hose connection.
Note: Place a piece of wood in recess to prevent damaging piston.
-
Remove seal with plastic wedge 3409 or equivalent.
Note: Ensure cylinder surface is not damaged.
Installing
-
Clean piston surface and seal with clean solvent only.
-
Thinly coat piston and seal with lubricant G 052 150 A2 before installing.
-
Place protective seal with outer sealing lip on piston.