Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
Parking Brake Cable: Service and Repair
Parking brake cables, removing and installing
Special tools required
Removing
-
Remove both rear wheels.
-
Remove heat shield (1).
-
Remove retaining nuts on heat shield (2) and slide heat shield forward,
-
Remove locking element -D-.
-
Screw adjusting nut -C- in onto stop, counter hold with a 13 mm wrench -E-.
-
Slide cable adjustment together.
-
Remove securing clip -1- and unhook parking brake cable from caliper.
Note: Be careful not to damage parking brake boot when removing and installing.