Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
-
Pry off cover cap - 1 - from seatbelt guide - 2 -.
-
Unscrew belt end fitting - 3 - from floor assembly (40 Nm).
-
Unclip seatbelt guide - 2 - and remove from belt - 4 -.
-
Remove cover and cushion for seatbench backrest.
-
Remove hex bolt - 1 - (40 Nm) and belt guide - 2 - from support - 3 -.
-
Remove hex nut - 5 - (40 Nm) or hex bolt (solid backrest) and unhook belt retractor - 4 - from support - 3 -.
-
Remove seatbelt with belt guide from support - 3 - downward.
NOTE: To unreel seatbelt, automatic belt retractor must be held in installation position.