Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
Fluid Line/Hose: Service and Repair
01V Automatic Transmission
Internal oil line, removing and installing
Special tools, and auxiliary items
^
Installation tool 3381
Removing
Remove the valve body.
-
Pry internal oil line off transmission housing with a screwdriver.
Installing
-
Replace O-rings.
-
Insert internal oil line in tool 3381.
-
Using a plastic hammer, drive oil line into transmission housing until tool makes contact.
Open side of tool 3381 faces toward outside of transmission.
Ensure oil line is kept straight; drive both ends in evenly.
-
Fill with ATF; check ATF level and top up.
-
Install the valve body.