Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
Shift Cable: Testing and Inspection
01V Automatic Transmission
Selector lever cable, checking and adjusting
Checking
-
Move selector lever into "P" position.
-
Remove selector lever cable from selector shaft lever (arrow).
-
Move selector lever from "P" to "2"
^
Mechanism and selector lever cable must move freely. If necessary replace selector lever cable or service shift mechanism.
-
Move selector lever into "P" position.
-
Move selector shaft lever to " P" The parking lock should engage and it should not be possible to turn the two front wheels in the same direction.
^
It should be possible to push the selector lever cable onto the selector shaft lever. Adjust selector lever cable if necessary.