Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
/Page-1030004.png)
1. Selector lever handle
2. Sleeve
^
Clips into selector lever handle
^
Installation position: Angled section faces inward
CAUTION: Check with your parts department for latest part number information.
3. Cover
^
With selector scale, selector lever lock indicator and Tiptronic indicator
^
Lift up to remove
^
To remove, disengage retainer from mounting bracket -1- using a screwdriver
^
Removing connector for gearshift positions and Tiptronic
4. Cover moulding
^
Separate piece
5. Trim
^
Insert into symbol panel
6. Symbol panel
^
With printed circuit
^
Clip into cover moulding 4
7. Masking panel
^
To remove, unclip guide from cover moulding 4
8. Guide
^
Guides masking panel
^
Unclip from cover moulding 4
9. Mount bushing
^
Secure in mounting bracket 10 with locking clip 21
^
Removing and installing
10. Locking clip
^
Secures mount bushing 9 in mounting bracket 21
^
Install with angled ends pointing toward inside of mounting bracket
11. Pull rod
^
Removing and installing
12. Spring
^
Removing and installing
13. Selector lever
^
With pull rod, coil spring, selector gate and Tiptronic spring mechanism
14. Stop buffer
