Passat Sedan L4-1.9L DSL Turbo (AHH) (1998)
-
Tighten bolts (hand-tight) securing valve body (arrows).
Bolt arrow -A- is shorter than the other bolts.
-
Tighten bolts to specified torque, working from inside outward.
-
Install clasp to secure wiring harness connector (arrow) and ensure complete engagement.
-
Lubricate seal on intake neck of ATF screen with ATF (arrows).
-
Bolt on ATF screen
-
Install oil pan with new gasket.
-
Tighten oil pan bolts in several stages and in diagonal sequence.
-
Fill with ATF check ATF level and top up.
Tightening torques