Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
-
Install throttle valve control module with new hoses and valve and secure with four screws (10 Nm or 7 ft lb).
-
Reconnect throttle cable and cruise control linkage
-
Place air intake elbow in front of throttle body, reconnect crank case vent hose -B-, slide elbow to correct position on throttle body and secure
with cap screw -C- (10 Nm or 7 ft lb).
-
Reconnect vacuum hose -A- for evaporative emission (EVAP) canister purge regulator to throttle valve control module with a pinch clamp.
-
Remove the rubber elbow between the vacuum amplifier and the brake booster vacuum pipe
-
Remove rubber seal and plenum panel cover
-
Remove vacuum pipe -1- to brake booster
-
Install new vacuum pipe 8D1 611931 AR from brake booster to bypass hose.