Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-595002.png)
^
Can only be installed in one position. Holes are offset
7. 10 Nm + 1/4 turn (90°) further
^
Always replace
8. Needle bearing
^
Pulling out and driving in, Refer to Clutch, M/T; Pilot Bearing.
9. Crankshaft:
^
Axial clearance new: 0.07 to 0.23 mm, Wear limit: 0.30 mm
^
Check radial clearance with Plastigage, New: 0.02 to 0.06 mm, Wear limit: 0.15 mm
^
Do not rotate the crankshaft when checking the radial clearance
^
Crankshaft dimensions part 1 of 2.
^
Crankshaft dimensions part 2 of 2.
