Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
-
Attach lifting device 10-222A as shown.
-
Support engine at front lifting eye with lifting device.
-
Lift engine with spindle of lifting device until air hose to throttle valve module touches bulkhead.
-
Take out left engine mounting.
-
Support subframe with workshop crane 1202 A.
-
First remove front subframe bolts -2 and -3- on left and right-hand sides. Then remove bolts -4-.
Note:
To avoid measuring wheel alignment, the subframe must only be loosened or lowered at the front end.