Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-677006.png)
-
Install guide sleeve 3241/2 onto camshaft journal.
-
Slide oil seal over guide sleeve.
-
Press seal in onto stop with press sleeve 3241/1 and bolt 3241/3.
-
Insert Camshaft Position sensor hood into notch in intake camshaft.
-
Install washer (taper facing outward) and tighten securing bolt to 25 Nm.
-
Install housing for Camshaft Position sensor and tighten to 10 Nm.
-
Install upper toothed belt guard.
-
Reconnect harness connector to Camshaft Position sensor.
