Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
Clutch Fluid: Service and Repair
Clutch system, bleeding
Special tools and workshop equipment required
-
VAS 5234 Brake filling and bleeder unit
-
Brake fluid specifications.
Note:
Open bleeder valve before operating bleeder unit.
-
Clutch pedal is not operated.
-
Connect brake filling and bleeder unit VAS 5234.
-
Remove insulation tray below engine/transmission, if installed.
-
Connect bleed hose -A- to slave cylinder (-arrow-) and open bleed valve.
-
Now switch on bleeder unit and let about 100 cm3 brake fluid run out.
Brake fluid must not be allowed to get onto the transmission.
-
Depress clutch pedal several times after completion of bleeding process.