Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-1375003.png)
-
Turn fuel delivery unit approx. 15° counter- clockwise onto stop with spanner 3307 and remove.
NOTE: If the delivery unit is to be replaced then drain old delivery unit before disposal.
Installing
NOTE:
-
Install fuel delivery unit in reverse order of removal.
-
Do not bend fuel gauge sender when installing.
-
Coat flange seal with fuel when installing.
-
Ensure fuel hoses are seated securely.
-
Do not interchange supply and return hoses (return hose -blue-).
-
Secure fuel hoses with spring-type clamps.
-
Note Installation position of fuel delivery unit flange: Mark on flange -1- must align with mark -2- on fuel tank.
-
After installing fuel delivery unit flange, check that the supply, return and breather lines are still clipped onto the fuel tank.
