Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
Throttle Cable/Linkage: Service and Repair
Accelerator Pedal Linkage Service and Repair
1 - Throttle cable mounting
- On bulkhead in plenum chamber
- Removing and installing See Fig. 1 below
2 - Throttle cable mounting
- On bulkhead
- Only vehicles with manual transmission
3 - Retaining clip
- Manual transmission Only
- Ensure it is seated securely
- Secured behind bulkhead
4 - Retaining clip
- Automatic transmission Only
- Ensure it is seated securely
- Secured before bulkhead
5 - Kickdown switch F8
- Automatic transmission Only
- On bulkhead
6 - 2-pin harness connector
- Black
7 - Accelerator cable
- Do not reuse damaged accelerator cable, replace
8 - Cable cam
- On throttle valve control part
9 - 10 Nm (7 ft lb)
10 - Support bracket
- For accelerator cable
11 - Retainer
- Throttle cable
12 - Accelerator pedal
13 - Mounting bracket
14 - Accelerator pedal stop
- Installed position of accelerator pedal stop on mounting bracket
See Fig. 2 below.