volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Spark Plug > < Diagram Information and Instructions|Page 6302
Page 2
background image

 

G61: G66: 

Terminal 1 +  socket  68 

60 

Terminal 2 + socket  67 

67 

Terminal 3 + socket  2 

Wire resistance: Max. 1.5 Ohms

-

Check wiring at socket 67 for short to sockets 60 and 68. 
-

Specification: Infinity Ohms

If wiring OK 

-

Loosen knock sensor and tighten again 
-

20 Nm (15 ft lb) CRITICAL TORQUE 

-

Perform road test. 

During road test following operating conditions must be fulfilled: 

-

Engine Coolant temperature must exceed 80 °C . 

-

After Engine Coolant Temperature is reached, the following operating conditions must be attained several times: Closed throttle (idle) Partial
throttle Wide Open Throttle Overrun 

-

At Wide Open Throttle, engine speed must exceed 3500 rpm

-

Check ECM Diagnostic Trouble Code memory. 

If knock sensor DTC still stored 

-

Replace knock sensor(s)

Spark Plug > < Diagram Information and Instructions|Page 6302