volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Oxygen Sensor (Before Three Way Catalyst) Aging Check|Page 3976 > < Oxygen Sensor (Before Three Way Catalyst) Aging Check|Page 3974
Page 3
background image

-

Measure resistance. 
-

Specification: 0.0 to 19.9 Ohms

If specification obtained 

-

Set Multimeter to "Voltage measurement" range. 

-

Connect Multimeter using aux. cables from VW 1594 to measure Voltage at terminals 1 + 2 (connector to Engine Control Module). 

-

Start engine and let idle. 

-

Measure the Voltage supply: 

When Display group 41, Display zone 4 shows 
Display, Htg.aC.ON: 
Specification: 11.0 to 14.5 Volts 

Oxygen Sensor (Before Three Way Catalyst) Aging Check|Page 3976 > < Oxygen Sensor (Before Three Way Catalyst) Aging Check|Page 3974