Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
Power Seat Switch: Service and Repair
Switch Unit, Removing And Installing
Removing
NOTE:
-
It is not possible to remove the switch unit, removal and installation of circuit board with wiring harness is described.
-
If one of the switches is malfunctioning, outer side seat trim must be replaced.
-
Remove Recaro seat.
-
Remove belt buckle.
-
Remove trim, backrest mounting bracket.
-
Remove seat side trim on door sill side.
-
Disconnect wiring harness of switch unit - 3 - and remove from seat frame.
-
Unscrew four bolts - 2 - and remove cover - 1 -.
-
Remove bolt - 4 - and remove circuit board - 3 - from switches in seat trim.
Installing
Installation is the reverse order of removal.