Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
-
Switch multimeter to Voltage measurement range
-
Connect Multimeter between terminals 3 + 4 of ECM connector using jumper wires from VW 1594 adaptor kit
-
Start engine and measure basic Voltage.
-
Specification: 0.40 to 0.50 Volts
-
Switch OFF ignition.
If specification not obtained
-
Check Oxygen sensor wiring.
If specification obtained
-
Replace Oxygen sensor G39 (before Three Way Catalyst).
Oxygen sensor wiring, checking
-
Connect VAG 1598/22 Test Box to Engine Control Module harness connector.