Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
^
Qty. 2
^
8 Nm (70 inch lbs.)
5. Seal
6. Bowden cable
7. Hole in side panel
8. Bolt
^
Qty. 2
9. Hole for special tool
^
Special tool 3369
-
Remove front bumper.
-
Remove air guide between lock carrier and air cleaner on lock carrier.
-
Remove bolt -3- and screw special tool 3369 onto right and left-hand longitudinal members.
-
Remove bolts -2- and -4- and pull lock carrier forward in area of special tool 3369.
Removing ribbed V-belt on vehicles with 4-cyl. gasoline engine
-
Turn tensioning device in direction of arrow to relieve tension on ribbed belt.
-
Secure with special tool -3204-.
Removing ribbed V-belt on vehicles with 4-cyl. Diesel engine
-
Turn tensioning device in direction of arrow to relieve tension on ribbed belt.
Vehicles with 4-cyl. gasoline engine
-
Remove pulley from coolant pump.
-
Remove ribbed belt.
-
Remove power steering pump ribbed belt pulley.
Note: It may be necessary to file out corners of tool VAG 1590
Continuation for all vehicles