Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
Pulling in front bonded rubber bushing
-
Coat bonded rubber bushing with tire mounting lubricant or similar.
-
Insert tool segments 3372/2 in tube 3372.
-
Pull in bushing -A- until thrust piece 3372/1 aligns with upper edge of tool 3372.
-
Lift tube 3372 and remove segments 3372/2.
-
Replace bridge 3351/4 with thrust piece 3351/1 and then push bushing in onto stop.