Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-1584001.png)
Fluid Line/Hose: Service and Repair
01N Automatic Transmission
ATF Lines - Without Air Conditioning
ATF lines, removing and installing
^
Thoroughly clean connections and immediate vicinity before loosening.
^
Insert ATF lines completely by hand onto stop in transmission or cooler and then screw on.
^
After replacing ATF lines, check and fill ATF level, if necessary.
Four-cylinder gas engine without air conditioning system
1. Bolt
^
5 Nm (44 inch lbs.)
^
Insert lines completely first and then tighten
2. O-ring
^
Coat with ATF
^
Always replace
3. Nut
^
30 Nm (22 ft. lbs.)
4. Bolt
^
25 Nm (18 ft. lbs.)
5. Bolt
^
10 Nm (7 ft. lbs.)
6. Bracket
7. Bolt
^
20 Nm (15 ft. lbs.)
^
Insert lines completely first, then tighten
8. O-ring
^
Coat with ATF
^
Always replace
ATF Lines - With Air Conditioning
ATF lines, removing and installing
