Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-1641001.png)
Shifter A/T: Testing and Inspection
Selector Mechanism, Checking
Selector mechanism, checking
WARNING: Before working on a vehicle with a running engine, ensure selector lever is in Park position "P" and apply hand brake.
Selector lever in "P" position and ignition switched on:
^
Brake pedal not depressed:
Selector lever shift lock solenoid -N110- keeps selector lever from being shifted out of "P" position.
^
Brake pedal depressed:
Shift lock solenoid -N110- releases selector lever.
Selector lever can now be moved to a drive position.
Selector lever in "N" position and ignition switched on:
^
Brake pedal not depressed:
Shift lock solenoid -N110- locks selector lever so it cannot be shifted out of "N" position.
^
Brake pedal depressed:
Shift lock solenoid -N110- releases selector lever, making It possible to shift into gear.
^
Starter must not be operable in selector lever positions "1," "2," "3," "D" and "R"
^
When travailing at speeds above 5 km/h (3.1 mph) (and shifting into neutral "N" selector lever solenoid lock must not engage and block selector
lever. Selector lever can be shifted into gear.
^
When travailing at speeds below 5 km/h (3.1 mph) (almost stopped) and shifting into neutral "N" solenoid for selector lever lock must not engage
until after approx. 1 sec. Selector lever cannot be shifted out of "N" position until brake pedal is depressed.
