Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-1682001.png)
Valve Body: Service and Repair
01N Automatic Transmission
Valve Body, Removing And Installing
CAUTION: Do not run engine or tow vehicle with oil pan removed or when there in no ATF in transmission.
^
The valve body or the conductor strip can be removed with the transmission is installed.
The conductor strip can be removed individually.
^
Always replace a valve body which is contaminated or inoperative.
^
Do not use fluffy cloths.
^
After re-installing oil pan, fill with ATF.
1. Plug
^
Always replace seal; see Fig. 2
2. Overflow pipe
^
Remove to drain ATF; see Fig. 1
^
Thread in to stop
^
Checking ATF level and topping-up
3. Oil pan
4. Bolt
^
12 Nm (9 ft. lbs.)
5. Magnet
^
Insert in oil pan recess
6. Spacer bushing
^
Press into gasket
7. Gasket
^
Always replace
^
Press spacer bushings into gasket
8. ATF screen
^
Installing; see Fig. 10
9. Bolt
10. Gasket
^
5 Nm (44 inch lbs.)
^
Always replace
^
Press onto ATF screen suction collar