Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-1683002.png)
9. Bolt
^
8 Nm (71 inch lbs.)
10. Bracket
^
For wiring harness
^
Secure wiring harness on bracket
^
Secured with bolts for valve body
11. Bolt
^
6 Nm (53 inch lbs.)
12. Transmission speed sensor -G38-
13. Spacer sleeve
^
Length: 8 mm (0.31 inch)
14. Internal oil line
^
Always replace
15. O-ring
^
Always replace
16. Speedometer Vehicle Speed sensor (VSS) -G22-
^
Replacing
17. O-ring
^
Always replace
18. Multi-function Transmission Range (TR) switch -F125-
19. Bolt
^8 Nm (71 inch lbs.)
20. O-ring
^
Always replace
21. Securing clip
22. Wiring harness
^
Transmission Fluid Temperature sensor -G93- integrated in wiring harness
^
To replace, remove and install valve body.
^
Release harness from bracket -Item 10-
^
Location of wiring harness connector: flat point of rear shoulder faces toward oil pan; lugs on collar are horizontal
23. Bolt
^
6 Nm (53 inch lbs.)
24. Transmission input speed sensor -G 182-
^
Replacing
25. Spacer sleeve
^
Length: 20 mm (0.86 inch)
26. Bolt
^
6 Nm (53 inch lbs.)
27. Bracket
^
For pressure regulator
28. Solenoid valve 4 -N91-
^
With O-ring
^
Apply a thin coat of petroleum jelly to O-ring before installing
^
To replace: remove and install valve body
29. Solenoid valve
^
Without O-ring
^
To replace: remove and install oil pan
30. Solenoid valve 2 -N89-
^
Without O-ring
^
To replace: remove and install oil pan
31. Bolt
^
6 Nm (53 inch lbs.)
32. Bracket
^
For solenoid valves
33. Solenoid valve 6-N93-
^
With O-ring
^
Apply a thin coat of petroleum jelly to O-ring before installing
^
To replace: remove and install oil pan
34. Solenoid valve 7 -N94-
^
With O-ring
^
To replace: remove and install oil pan
35. Solenoid valve 5 -N92-
^
With O-ring
^
To replace: remove and install oil Pan
36. Solenoid valve 1 -N88-
^
Without O-ring
