Passat Sedan L4-1781cc 1.8L Turbo (AEB) (1999)
/Page-1717005.png)
Fig. 11 Position of circlips
^
Circlips -1- and -2- secure input shaft ball bearing; adjusting input shaft. See: Adjustments
^
Circlip -3- secures 3rd and 4th gear synchronizer hub. It is always 2 mm thick
Identification: color - brown
Part No.: N 902 945 01.
^
Circlip -4- secures 3rd and 4th gear synchronizer hub. The thickness is determined according to table.
Identification: color - blue
^
Circlip -5- secures 5th gear. The thickness is determined according to table.
Fig. 12 Determining thickness of Circlip
-
Determine thickest Circlip which will just fit and install it.
^
Circlip 4-, for 3rd and 4th gear synchronizer hub.
The following circlips are available:
^
Circlip -5-, for 5th gear.
