Passat Sedan L4-1896cc 1.9L DSL Turbo (1Z) (1997)
Installation
1. Position wheel cylinder into backing plate
2. Tighten socket head bolts (12).
3. Connect fluid lines to wheel cylinder.
4. Connect parking brake cable to brake lever.
5. Place brake shoes on wheel cylinder pistons.
6. Connect lower return spring and install brake shoes onto lower support.
7. Install wedge spring.
8. Install springs and retainers.
9. Install brake drum and adjust wheel bearing play. Refer to Transmission and Drivetrain.
10. Bleed brake system.
11. Depress brake pedal firmly one time to set self-adjusting mechanism.