Passat Sedan L4-1896cc 1.9L DSL Turbo (1Z) (1997)
Air Door Cable: Service and Repair
With Air Conditioning
Cable Identification
NOTE:
-
First connect cables to removed controls then adjust and secure cables to levers on air conditioner.
-
Sleeve ends of cables which are marked with a colored line are attached to the controls.
-
Position cable sleeves -2- and -3- at stops on the controls and then se cure. Secure sleeve for cable -1- see below.
-
Adjust cables at flap levers with the controls installed.
-
All flaps must audibly contact stop when controls are turned.
1- Footwell/Defrost Flap Cable
-
From air distribution rotary control knob to footwell/ defrost flap
-
Black sleeve
-
Adjusting cable at footwell/ defrost flap see below.
2- Cable for Center Flap
-
From air distribution rotary control knob to center flap
-
Black sleeve
-
Adjusting cable at central flap see below.
3- Temperature Control Flap Cable
-
From temperature rotary control knob to temperature control flap
-
Blue sleeve
-
Adjusting cable at temperature control flap see below.
Footwell/Defrost Flap Cable, Adjusting
-
Install warm and fresh air controls.
-
Turn air distribution rotary control knob to stop at "defrost" position
-
Press footwell/defrost flap lever onto stop -arrow- and secure black cable sleeve.