Passat Sedan L4-1896cc 1.9L DSL Turbo (1Z) (1997)
1.
Airbag Unit
2.
Bracket
3.
Connector
4.
Opening cover with retaining frame
5.
Hex bolt (Torque to 10 Nm [7 ft lb].)
Airbag Unit Removing:
-
Disconnect battery ground strap.
-
Open Cover -4-.
-
Remove Hex Bolt.
-
Disconnect connector -3- and remove airbag unit.
Installing:
-
Install airbag unit in reverse order.
-
Switch ignition on.
WARNING: Ensure that no person(s) remain in vehicle during following steps.
-
Connect battery ground strap.
Opening Cover
Opening Cover with Retaining Frame, Opening and Removing:
WARNING: Before working on opening cover, disconnect the battery ground strap and remove the knee bar.