Passat Sedan L4-1896cc 1.9L DSL Turbo (1Z) (1997)
/Page-1368002.png)
-
Place belt tensioning unit -1- into pipe tool -2-.
CAUTION: The Inside of the pipe must be clean. Remove any material remaining from previous ignitions.
-
Holding pipe tool in vertical position, let belt tensioning unit fall into tube.
WARNING: Do not look into the tube after dropping in the tensioning unit.
NOTE: The impact at the bottom of the pipe will activate the belt tensioning unit. The belt retractor and tensioning unit can then be disposed of as
normal scrap.
