volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Throttle Position Sensor > < Diagram Information and Instructions|Page 659
Page 2
background image

Specification, see diagram
Scale A shows resistance values for temperature range 0 to 50°C
Scale B the values for temperature range 50 to 100°C.

Examples:
30°C corresponds to a resistance from 1500 to 2000 Ohms
80°C corresponds to a resistance from 275 to 375 Ohms

If the specification is not obtained:
-

Replace injection pump

If specification obtained:

-

Connect Test Box VAG 1598/18 to ECM harness connector

-

Check wiring for open circuit between Test Box and connector -1- using wiring diagram:
terminal 7 + socket 63
terminal 4 + socket 33
Wire resistance: 1.5 Ohms maximum.

Also check wires for shorting to one another
Specification: Infinite Ohms.

If wiring OK:
-

Replace Diesel direct injection system ECM J248

Throttle Position Sensor > < Diagram Information and Instructions|Page 659