Passat Sedan L4-1896cc 1.9L DSL Turbo (1Z) (1997)
/Page-1147001.png)
Starter Motor: Testing and Inspection
Starter Does Not Crank
Test Conditions:
^
Battery voltage OK.
^
Starter solenoid terminals and ground strap connections between the engine, body and battery must be tight and must not be corroded/oxidized.
For troubleshooting is required:
^
Use ammeter and/or digital multimeter Fluke 83 (US 1119) for all electrical checks.
^
Use connector test kit VW 1594.
^
Use wiring diagram.
Troubleshooting - Starter Dose Not Crank
Measuring Solenoid Voltage
1 - Terminal 30 - from battery
2 - Connection for field windings
3 - Terminal 50 - from ignition starter switch
