Passat Sedan L4-1896cc 1.9L DSL Turbo (1Z) (1997)
/Page-902002.png)
If the specification is not attained:
-
Remove drive plate again and install shim -2-.
-
Re-tighten bolts.
^
30 Nm (22 ft. lbs.)
-
Repeat check measurement
If correct clearance obtained
-
Tighten bolts to 60 Nm (44 ft. lbs.) and turn 90° (1/4 turn) further (The additional turn can be achieved in more than one step).
