Passat Sedan L4-2.0L Turbo (BPY) (2007)
Installation
‹› Before installing, inspect the securing clips for damage and replace if necessary.
-
Press door trim securing clip inward.
-
Further installation is in reverse order of removal.
Passenger Side Front Door Trim
Door Trim
Passenger Side Front Door Trim
Removal
-
Switch off ignition.
-
Pry the upper section of the grip shell - 1 - out of the pull handle in the door trim using the (3409).
-
Remove bolts - 2 - and - 3 - (4.5 Nm).
-
Remove the two bolts - 4 - (2 Nm).
-
Disengage door trim from mounts in lower area using (3392).
-
Disengage door trim from mounts on the sides using (3392).
-
Pull door trim vertically upward out of window shaft.