Passat Sedan L4-2.0L Turbo (BPY) (2007)
4
Door Hinge with Door Arrester
‹› Lower portion is attached to upper portion of hinge with screw - 7 -.
‹› Hinge is divided
5
Socket Head Bolt
‹› installed from the inside of the vehicle
‹› 20 Nm + 1/4 additional turn (90 °)
‹› Always replace bolts after removing them.
6
Socket Head Bolt
‹› 20 Nm + 1/4 additional turn (90 °)
‹› Always replace bolts after removing them.
7
Bolt
‹› 28 Nm
‹› This screw must be removed to remove door at hinge.
8
Door Hinge
‹› Upper portion is attached to lower portion of hinge with screw - 7 -.
‹› Hinge is divided
9
Door Hinge
‹› Lower portion is attached to upper portion of hinge with screw - 11 -.
‹› Hinge is divided
10
Socket Head Bolt
‹› 20 Nm + 1/4 additional turn (90 °)
‹› Always replace bolts after removing them.
11
Bolt
‹› 28 Nm
‹› This screw must be removed to remove door at hinge.
12
Socket Head Bolt
‹› 50 Nm
‹› Always replace bolts after removing them.
13
Door Hinge
‹› Upper portion is attached to lower portion of hinge with screw - 12 -.
‹› Hinge is divided
14
Socket Head Bolt
‹› 20 Nm + 1/4 additional turn (90 °)