Passat Sedan L4-2.0L Turbo (BPY) (2007)
‹› Assembly piece - 4 - is clipped in.
-
Insert drain hose - 3 - through opening in tank flap unit and pull drain hose through until it stops.
-
Guide drain hose into side panel.
-
Slide tank flap unit - 1 - with hinge side first into side panel.
-
Then swivel the fuel filler door unit completely into side panel, make sure that upper and lower catches engage correctly in side panel.
-
Pull rubber piece over tank filler neck and tighten bolt - 2 -.
Tightening specification for bolt - 2 - 1.5 Nm.
Actuator
Removing