Passat Sedan L4-2.0L Turbo (BPY) (2007)
Hood Striker: Service and Repair
Rear Lid
Striker Pin
Removing
-
Remove the lock carrier cover.
-
Remove the bolts - 2 - and remove striker pin - 1 -.
Installation
-
Assemble the latch bracket - 1 -.
-
Screw - 2 - tightening specification: 23 Nm.
-
Striker pin, adjusting, refer to => [ Striker Pin, Adjusting ] See: Trunk / Liftgate/Service and Repair/Rear Lid Overview
Further installation is in reverse order of removal.