Passat Sedan L4-2.0L Turbo (BPY) (2007)
-
Insert hose - 3 - through opening in sealing channel.
-
Slide gasket - 2 - over hinge - 1 - and press gasket together until it engages audibly.
‹› When closing rear lid, the sealing lip on hinge gasket must not be pulled in from hinge pipe. Hinge must be adjusted so that hinge pipe does not
grind on the sealing lip.
-
Press valve - 5 - into sealing channel.
-
Press gasket - 2 - into sealing channel and into valve - 5 -.
‹› Make sure that gasket - 2 - and clips in valve - 5 - are properly seated.
-
Slide hose - 3 - into grommet - 4 -.