Passat Sedan L4-2.0L Turbo (BPY) (2007)
With holes present
-
Place license plate holder - 1 - on radiator grille - 3 - and press in clips - 2 -.
With no holes present
‹› On vehicles with front parking assist, - depth dimension a - of 12 mm must be maintained when boring holes.
‹› The parking assist wiring harness - 3 - is routed at the height of the upper bore hole on the bumper carrier - 5 -.
-
Center license plate holder - 1 - to radiator grille - 3 -.
-
Set drill machine depth stop to - dimension a - of 12 mm and drill holes.
-
Place license plate holder - 1 - on radiator grille - 3 - and press in clips - 2 -.